Stihl serial number year code how to#

STIHL AutoCut C 5-2 mowing head Pull the thrust plate (1), if fitted, off Fitting Mowing Head with Screw the shaft (2).

: Mounting The Cutting Attachment вЂ“ turn the thrust plate back and forth if STIHL AutoCut 5-2 mowing head, necessary.

Adjusting the loop handle The loop handle can be adjusted to suit the height and reach of the operator and the application by changing distance (A).

: Mounting The Loop Handle English Mounting the Loop Handle Mounting the Deflector Your new power tool comes with the loop handle mounted on the drive tube, but it must be turned and lined up to suit your requirements.

Shoulder Strap Cutting Attachments Shoulder strap may be used Mowing heads STIHL AutoCut C 5-2 STIHL AutoCut 5-2 STIHL FixCut 5-2 STIHL Polењњut 6-3 FS 40, FS 40 C, FS 50, FS 50 C.

: Approved Combinations Of Cutting Attachment, Deflector, Handle And Harness вЂ“ risk of accidents.

Polymer Blades To reduce the risk of accidents from shattered blades, avoid contact with stones, metal and similar solid objects. is a risk of the cutting tool shattering and flying parts injuring the operator or STIHL Polењњut 6-3 Mowing Head with bystanders.

If the wear limit marks are ignored, there from thrown parts of the head.

Do not approved by STIHL and make sure it is housing components) вЂ“ and this can attempt any maintenance or repair work in good condition вЂ“ see 'Specifications'. clutch, polymer Service the machine regularly.

Use only a spark plug of the type components (e.g.

heavy impact or a fall), soon as the engine is Check the cutting attachment at regular always check that it is in good condition.

English If your power tool is subjected to Always shut off the engine before Your power tool produces unusually high loads for which it was not leaving the unit unattended.

To reduce the risk of Take special care in slippery conditions injury, avoid contact with (ice, wet ground, snow), on slopes or the cutting attachment. STIHL recommends a STIHL servicing dealer.

15 meters of your own idling, have the machine checked by position вЂ“ even when starting.

If secure вЂ“ a loose boot may cause damage.

English In vehicles: Properly secure your power To reduce the risk of serious or fatal Check that the spark plug boot is вЂ“ tool to prevent turnover, fuel spillage and burn injuries, check for fuel leakage.

If you have any questions in this respect, consult a FS 40, FS 40 C, FS 50, FS 50 C. accessories that are explicitly approved for this power tool model by STIHL or are technically identical.

Only use cutting attachments and drive tube or loop handle.

Stihl serial number year code how to#

: Guide To Using This Manual Manual fuel pump If you have not used this type of power tool before: Have your dealer or other STIHL's philosophy is to continually experienced user show you how to improve all of its products.

Techniques Approved Combinations of Cutting It has been built using modern Attachment, Deflector, Handle and production techniques and Harness comprehensive quality assurance.

: Table Of Contents English Contents Dear Customer, Guide to Using this Manual Safety Precautions and Working Thank you for choosing a quality engineered STIHL product.

Summary of Contents for Stihl STIHL FS 40